What's the size of the 50 angle iron?
Specification for 50 equal anglesTwo sides at right angles, 90 degrees. The length of the side is 50mm, and the thickness of the edge is 3mm, 4mm, 5mm and 6mm. The corresponding weight of each meter is 2.332 kg, 3.059 kg, 3.770 kg, 4.465 kg, respectively, four kg.
Angle called angle, the steel strip is perpendicular to each other on both sides into the corner. There are equal angles and unequal angles. The two sides of an equal angle steel are equal in width.The specifications are expressed in millimeters of edge width * edge width * edge thickness. Such as "/ 30 x 30 x 3", that is 30 mm equilateral angle edge width edge thickness was 3 mm. Also available models that model is the number of centimeters wide, such as angle 3#. The model does not mean the size of the different edges and sizes of the same model. Therefore, the width, the edge and the thickness of the angle iron should be filled out in the contract and other documents, so as not to be indicated by the model alone. Standard Specification for hot-rolled equal angle iron is 2#-20#.
Is the grading angle and side angle and side angle, it has three sides, say according to the above 50*50*3, this is an equal angle on both sides, tianxiangcheng, 50mm, high 3mm.
