What's wrong with the gear ring slip?
The ring gear on the motor gear and the engine may have broken, you can start from the outside to remove the check, check the startup machine gear is damaged seriously, and check the startup action start gear rotates, the gear is not out of place, and then check the ring gear. According to what you have said and combined with the usual breakdowns, the possibility of a tooth ring in your car is very bad, and it is estimated that the gear ring needs to be replaced
First, the gap between the teeth is too large, there are two possibilities, gear shift or normal tooth wear.Two, the active shaft bearing wear, insufficient force to drive the driven wheelThree, driven wheel fault
2, there are three starter slip, first, there is not enough voltage. Two is the gear slip. The three tooth gear, and the gear ring gear wear, a great noise, those voices are not pulling metal. The first two kinds of circuit maintenance, it is best to find a mechanic teacher gear ring, in the maintenance of starter, or start the opportunity soon damaged.
1, driven by a motor starter gear to drive the flywheel, a clutch, suction and pull switch, belonging to the slip engaging device is broken, fight tooth squeaking and spark is pulling switch and drive gear or flywheel ring gear is bad of course for many reasons, the spark plug for oil, electric fuel supply, fuel supply system no, low temperature, low pressure etc..
