What's wrong with the stainless steel wire bending?
The most commonly used methods of welding stainless steel: manual welding, arc welding, and tungsten inert gas welding
This welding method is very simple, and can be used for welding in outdoor use, almost all of the material, it has good adaptability, even under water is no problem. Most of the welding electrode welding. The welder can be TIG, the arc length depends on the person's hand: when you change the slit electrode and the workpiece, using the arc length direct current arc electrode, both as a carrier of the change you are welding, in most cases. And the welding filler. By the electrode alloy or non alloy metal cored wire and electrode coating composition of this layer coating the invasion from the air to protect the weld at the same time, it can also cause the stable arc welding seam forming slag layer the welding electrode can be formed. That is titanium, but also a nature, depends on the thickness and composition of the coating. The titanium electrode is easy to weld, the weld surface appearance. In addition, the welding slag is removed, if the electrode is stored for a long time, must be re baked Bake because the moisture in the air quickly builds up on the electrodes. Company 2, arc welding
Manual welding is one of the most common welding method is very easy to use. The arc length is adjusted by hand, welding gap between depending on the size of the workpiece and the same time, as the carrier of the arc welding and welding filler materials in use.
