What should be noted when installing antiseptic wood flooring?
4, the application of stainless steel, hot galvanized or copper (mainly to avoid future rust corrosion, and affect the connection fastness) to install the installation of pre-drilling, in order to avoid corrosion wood cracking.
5, as far as possible the use of existing size and shape, broken parts of the processing should be painted preservatives or outdoor protective coating; because the preservative wood itself is semi-finished products, rough part of the wood after the shop can be reduced to less than 20% moisture content, Light again, if you want to have a better effect, clean the surface can also be painted after the outdoor protective coating (if the color of the protective paint should be fully stirred). In case of rainy days, it is best to cover with plastic sheeting, and so fine after brush outdoor paint protection. Water should be avoided within 24 hours after brushing.
Selection and construction of the installation Note:
1, the best moisture content of structural wood (indoor 12-16%) (20% outdoor), which requires you to look carefully at the time of selection, do not buy those irregular processing of wood, they are all not reasonable Of the cellar processing.
2,50mm above the thickness of the width of 120mm or more in the center of the back of the plate can open a groove to reduce the deformation of the cracking rate.
3, the production of antiseptic wood installation, the need for corrosion between the wood to stay 0.2-1CM gap, to avoid rain and water and the expansion of wood preservative. This is the cement road to be crossed is a reason ~
6, the surface of the external protective coating or oil-based paint after brushing (just once) in order to achieve the best results, within 48 hours to avoid moving or moving heavy objects, so as not to damage the anti-corrosion wood surface has formed a protective film. If you want to get more excellent anti-dirty effect, if necessary, then do two dedicated outdoor varnish treatment.
7, due to the use of outdoor environment, the special nature of anti-corrosion wood will appear cracks, subtle deformation, is a normal phenomenon, does not affect its corrosion resistance and structural strength.
8, the general outdoor wood protective coating is permeable type, in the wood fiber will form a protective film, can effectively prevent the erosion of water on the wood, cleaning can be used to clean the general detergent, tools available brush.
9, 1 year to 1.5 years or so to do a maintenance; with a dedicated wood water-based paint or oil paint can be painted.