What should be paid attention to in the daily maintenance of the extruder?
Extrusion machine regular maintenance mainly has these aspectsdrive system(1) check the temperature rise of motor and oil tank, whether the bearing is overheated locally, the abnormal noise of motor and gear, oil leakage, radial circle of oil filter and spline shaft, and the contact gap with the end of screw.(2) regularly clean the oil filter and remove the dirt at the bottom of the tank, and lubricate the lubrication points regularly.(3) the new gear box has been filled with gear oil, and new oil will be replaced every 4000 hours after the operation.
Attachment(1) inspect the rolling barrel, vibrating screen, motor and so on, and leak out the sealing parts.(2) cooling equipment and piping are clean and clean, and there is no suspended impurity in industrial soft water. Water filters and water tanks should be regularly checked, cleaned, kept clean and replaced with new water.
HostCheck the patency of cooling water, temperature (general / 26 C), feeding, cylinder temperature and pressure, friction condition of screw and barrel.NoseThe size loss of the perforated plate, the damage and corrosion of the runner surface, and whether the obstruction occurs affect the appearance and output of the product.
