Home > categories > Construction & Real Estate > Geogrids > What way to quickly cut the geogrid
Question:

What way to quickly cut the geogrid

What way to quickly cut the geogrid

Answer:

3, one-way geogrid for reinforcing the dam and road slope and retaining wall: the traditional embankment especially filling high embankment filling and often need to shoulder edge easy compaction, resulting in slope rainwater invasion, collapse phenomenon, at the same time with a gentle slope, covers an area of large, retaining wall have the same problem with Geogrid embankment slope or retaining wall reinforcement can be reduced by two points a area, prolong service life, reduce the cost of 20 - 50%.4, one-way geogrid to reinforce the River seawall: made of stone cage, with the grid and use, prevent the dam washed collapse, stone cage is permeable and can reduce the impact of the waves, prolong the life of the dam, save manpower, shorten the construction period.
Unidirectional geogrid, 1 unidirectional Geogrid Reinforced Soft Foundation: Geogrid can rapidly improve the bearing capacity of the foundation and development of settlement control, can effectively load to the base of a wider upper limit on the road side, thereby reducing the base thickness, reduce project cost, shorten the construction period, prolong the service life.2, check the geogrid reinforced asphalt pavement or cement: Geogrid laying layer at the bottom of asphalt or cement, can reduce rutting depth, prolong the fatigue life of the pavement, but also can reduce the asphalt or cement pavement thickness, in order to save costs.
Uniaxial tensile geogrid1, is a kind of polymer as the main raw material, adding anti UV, anti aging agent must, after the original tensile distribution chain shaped molecules scattered re aligned linear, pressure into a sheet by extrusion and punching network rules, high strength geosynthetics and longitudinal stretch into the. In this process, the polymer is in a directional linear state and a long elliptical structure with uniform distribution and high node strength is formed. This structure has very high tensile strength and tensile modulus, tensile strength reached 100-200Mpa, close to the level of low carbon steel, much better than the conventional or existing reinforced materials, especially in the company of such products is more than the international level of the early high (elongation at 2% - 5%) tensile strength and tensile modulus. A chain system that provides an ideal force for the soil to bear and spread. The tensile strength of the product (>150Mpa), to adapt to a variety of soil, is widely used in the reinforcement material. Unidirectional geogrid use:

Share to: