Home > categories > Home & Garden > Hanging Baskets > When the electric basket hoist descends, the cause of the slip
Question:

When the electric basket hoist descends, the cause of the slip

The height of the work platform at both ends of the height of the work platform should not exceed the number

Answer:

electric basket equipment parts wear and tear aging, when the phenomenon occurs, according to the life of the basket to judge, if the basket used for many years, may consider whether the more protection of the ubil um Product
High safety equipment for the basket includes upper limit limiters, lower limit limiters, alarms, etc
the basket should be installed protective shed, to prevent the height of falling objects caused by injury personnel the basket should be installed on the limit device, it is appropriate to install the lower limit device to open the road to plant independence the use of hanging blue operation, should be ruled out the impact of the normal operation of the obstacles Under the basket may cause damage to the falling range, set the safety isolation area and warning signs, personnel, vehicles can not stay, access in the basket engaged in the installation, maintenance and other operations, the operator should wear a tool bag the use of foreign basket equipment should be Chinese manual; product safety performance should be consistent with our current standards not the basket as a vertical transport equipment, shall not use the basket transport materials the basket should not be more than two operating personnel the basket of normal work, the staff should be from the ground into the hanging blue, not from the top of the building, windows, etc or other holes out of the basket in the basket of the operating staff should wear helmets, seat belts, and safety lock should be properly placed in the independent set of safety rope the basket platform should maintain a load balance, is strictly prohibited overload operation the basket to do the lift operation, the work platform at both ends of the height difference should not exceed 150mm

Share to: