When the gasoline polishing machine works, the tilting gate will stall. What is the reason?
1. the spark plug loses its ignition capabilityThe 2. throttle is out of order. The above two problems will cause engine vibration, speed instability.
4. gearbox load transfer and friction characteristics of quality failure gearbox oil, increase friction and wear, gearbox noise followed, at the same time, sludge (impurities or contamination) will be generated in the internal transmission (e.g. body), resulting in transmission appears out of frustration, and impulse, skid, flameout, noise, delay, high temperature, oil spill,. (Audi and other high-end models will call the police, enter the gearbox protection mode), if not resolved in time, the gearbox will be scrapped.
3., carbon deposition will cause insufficient gasoline combustion, so that the engine will appear jitter problems. The impact of carbon on the car is quite large, first of all, to reduce the power of the engine, that is, to make the power output uneven and gradually attenuated, in other words, more and more lack of force. Two is to increase fuel consumption, increase your financial burden. The three is difficult cold start, is sparking difficult, not easy car, and finally the combustion chamber carbon Yan will cause a heavy cylinder knock, low speed and acceleration noise, causing damage to the piston and crankshaft, causing the engine temperature which can seriously affect the automobile safety. Emission standards exceeded, not only through the annual inspection, but also directly aggravate the pollution of the environment.
