Where can I buy ground level bending machine?
When galvanized round steel is connected with galvanized flat steel, its length is not less than 6 times of the diameter of round steel. If necessary, it should be welded at right angle with auxiliary round steel or flat steel.
When lap welding is adopted, the welding length is as follows: 1. Galvanized steel bar is not less than 2 times its width, no less than three surface welding. When the width of flat steel is different, the length of lap should be wide. Before laying, the flat steel should be adjusted straight, simmer, bend not to die, straight line should not be obvious bending, and should stand upright. 2. The length of galvanized round steel shall be no less than 6 times of its diameter, and shall be welded on both sides (when the diameter is different, the lap length shall be of big diameter).
Galvanized flat steel and galvanized steel (or steel) for welding, reliable connection, should be in addition to the contact regions on both sides of the weld, should also direct the flat curved (or rectangular) and steel (or steel) and steel pipe welding, when welding on the steel pipe wrapped around the welding length 2 times less than the width of flat steel.
