Where can I get the fire escape from the fire elevator?
Fire elevator landing is generally provided by the elevator manufacturer landing interface and feedback interface (in the elevator control cabinet), provided by the fire control module normally open output, and achieve landing. Should be installed by the professional elevator construction units, debugging, do not own wiring, once the error will lead to damage to the elevator control panel.
Working principle of fire elevator landing system:Use the control module to operate the elevator normally. When a fire occurs, the normally open point is closed, and the elevator makes a forced landing command, which breaks down to the first floor. The elevator fire switch is connected with the landing point in series (usually closed), when firefighters open the elevator fire switch, will damage the control module closed point, the elevator back to normal use.Fire elevatorFire elevator is a kind of elevator that has fire fighting and rescue function for fire fighters in building fire. Therefore, fire elevator has higher fire protection requirements, and its fire protection design is very important. At present in the mainland of China, the real meaning of the fireman lift is very rare, the so-called "fire elevator" now see is with fire switch, return to base station or leave the preset layer function of ordinary passenger elevator, can take in the event of fire.
Wiring method for fire elevator landing system:The 1. module leads to the 2 line of the control cabinet, and receives two signals on the fire escape signal, the elevator brand is different, and the terminals are different.2. control cabinet output two lines, to the fire module, usually by elevator, fire linkage relay control, when there is fire signal, two lines on the pass.
