Where is the cement pressure plate installed?
Light keel plus cement pressure plate:
Formal method: only use three light keel plus two pieces of cement pressure plate production. Light Gang keel did not make the frame, but played a connection role. This is not strong enough. But the provincial workers expected material.
Formal methods: the use of light keel made of frames, after the supervision and acceptance by the Party, and then sealed cement pressure plate, linked to steel wire mesh, and finally paste the disk.
Features: not easy to deformation, nowadays the most commonly used company decoration process.
Plastic buckle plate, plastic aluminum plate production:
These two methods for home decoration finished, and want to wrap up the riser. Because it is not necessary to fill the disk, it is convenient.
Plastic buckle: wood keel plus angle, directly from the bottom of the buckle up into the installation. Disadvantages: not beautiful.
Aluminum-plastic plate: wood keel on the nail nine PCT board, and then all the glue to the aluminum-plastic plate stick to a variety of colors, close to the disk effect. Disadvantages: aluminum-plastic plate angle is easy to crack, should use thicker plate.
Wood keel plus cement pressure plate:
The most construction method, the construction of the most simple, easy. Disadvantages: wood keel in the bathroom humid environment is easy to absorb water, mold, resulting in deformation, so that the chip fried. Remedy: After installation, paste the front of the anti-root tube to do waterproof, to prevent the ground water into the riser, immersed in the wood keel.
The following is the package of the construction method of classification, comparison brick: by the mud construction, in front of the brick, with red brick, the riser wrap up. Features: sound insulation is good, strong and strong, not easy to deformation, paste the disk is not easy to fry. Disadvantages: relatively thick, accounting for space.
