Where is the general installation of the fire control module? What is the installation height?
The installation of the control module is not high, and the installation position is mainly in the controlled equipment, such as the electrical control module, which is installed in the control box of the cut power supply.
The installation of the control module is not high, and the installation position is mainly in the controlled equipment, such as the electrical control module, which is installed in the control box of the cut power supply. Be sure to speak high, probably 1.5M
General installation on one side of the passenger elevator, the average stature can touch to the place.
Location requirements, control module installation, not called height requirements. Installation position, in a controlled device, such as a power cut module, is installed in the control box of the cut power supply
Fire control module is usually open or normally closed output status, through the state of the lower end of the device to send signals to make corresponding action, depending on the scene, the installation position is not the same:Starting and stopping position of exhaust fanAir outlet switch positionRolling door lifting positionElevator lift control positionStarting and stopping position of pumpBroadcast floor control positions are possibleAs for height inversion, there seems to be no explicit specification to emphasize, because most of these modules are placed close to the linkage units
