Where is the lining of the engine located in the engine?

Answer:

Working conditions of fuel pump switch in the air flow meter on the work; to check the cylinder spark plug; check the ignition timing. If the ignition timing is not correct, should further check the ignition timing control system of the power supply;? B11? And check ECU, determine whether the failure of ECU.

Rupture; inspection of high pressure sparks. If the spark is not normal, should check the high-pressure line, ignition coil, distributor and ignition; inspect the ignition sequence is correct; inspect oil situation of fuel supply system. In the case of a tear confirmation tank, check the fuel pressure in the fuel supply pipe; check the ignition timing and the ignition sequence of each cylinder; the check.

Then the fault for idle speed control valve and its fault or intake pipe leakage, if the pedal to the middle position of opening, still won't start, should be the next step to check the visual inspection. Check the air inlet for leaks; check the hoses and their connections for good condition; check the crankcase ventilation, hose leaks, or

The starting gear, starter and engine can not be rotated, and the starting system should be inspected. First, check and keep the battery pole connection and contact; if the battery is normal, check the starting line, the fuse and the ignition switch; the pedal to the middle position of opening, and then hit the starter. If this time, the engine could start