Which industries need valves?
Valve as a general component, widely used in various industries, but there are three main purpose of application in various industries:1, routine inspection needs;2, new projects supporting;3, emergency reserves.Valve market trendsDue to changes in user demand, the market trend of valve products will also change accordingly. In the future, the main trends are as follows:1 with the transfer of oil development to the mainland oil fields and offshore oil fields, and the power industry under the 300 thousand kilowatts of thermal power to more than 300 thousand kilowatts of thermal power and hydropower and nuclear power development, and valves should be changed based on device applications and the corresponding changes in its performance and parameters;2 urban systems generally use a large number of low-pressure valve, and to the development of environmentally friendly and energy-saving, low iron gate that is used in the past gradually shifted the environment-friendly plastic sheet valve, balance valve, metal sealed butterfly valve and the center line butterfly valve seal transition, oil and gas pipeline projects to develop in the direction, which in turn requires a large number of flat gate valve and ball valve the;
Valve application industryValve users in a wide range of industries, can be divided into petroleum, petrochemical, chemical, metallurgy, electricity, water conservancy, urban construction, machinery, coal, food and other. Among them, the machinery and chemical industry users are most concerned about the valve market, and their requirements for the valve is also higher. The largest users of valves are the petrochemical industry, the power sector, the metallurgical sector, the chemical industry and the urban construction sector.Valve application typeIn the application of the types of valves, machinery, metallurgy, petrochemical, chemical, urban construction and other industries, the application of the valve classification of the most. Especially in the machinery industry, all kinds of valves are basically applied. In addition to the mechanical industry, the safety valve is mainly used in chemical industry; butterfly valve is mainly used in petrochemical and metallurgy; diaphragm valve is mainly used in metallurgy, electric power and chemical industry; check valve is mainly used in metallurgy, chemical and petrochemical; valve mainly used in petroleum and chemical industry; the cut-off valve is mainly used in metallurgy, petrochemical, chemical and power sewage; valve is mainly used in petrochemical and chemical industry; the ball valve is mainly used in petroleum, chemical and metallurgy; valve is mainly used in chemical industry, electricity and construction; the valve is mainly used in chemical, metallurgical, power and food; used in petrochemical and metallurgy main plunger valve; plug valves are mainly used in chemical and metallurgical valve; mainly used in petrochemical, chemical and metallurgy; steam traps are mainly used in chemical and petrochemical.
3., the other side of energy development is energy conservation, so from the perspective of energy conservation, it is necessary to develop steam traps, and to sub critical and supercritical high parameter development;4., the construction of power stations to large-scale development, so the use of large diameter and high pressure safety valve and relief valve, but also need to quickly open and close the valve;5., for the needs of complete sets of projects, the supply of valves from a single species to more varieties and specifications. The valve required for an engineering project is growing with the full availability of a valve manufacturer.In the next few years, the overall trend in demand for the valve for the upward trend, the valve of this large volume of industrial supplies, its demand in steady growth. Among them, the demand for a larger number of valves in turn are: ball valve (15.5%), cut-off valve (12.9%), safety valve (12.5%), gate valve (12.5%), butterfly valve (10.6%), regulating valve (8%) and check valve (6.1%).
