Which is better for saw blade, alternating tooth ladder or flat tooth?
1., about the most widely used teeth, cutting speed, grinding relatively simple. Suitable for cutting and crosscut various soft and hard wood materials and MDF, plywood, particleboard etc.. Equipped with anti elastic protection around the tooth is tooth plate for dovetail, longitudinal cutting of various degree; with negative rake angle of tooth saw blade sharp, serrated cutting because of good quality, usually used for veneer cutting.2. flat tooth saw is rough, cutting speed is slow, grinding is the most simple. Mainly used for sawing ordinary wood, the cost is lower, more used for smaller diameter aluminum saw blade, in order to maintain cutting to reduce adhesion, or used for grooving saw blade, to keep the groove bottom leveling.The 3. ladder flat tooth is a combination of trapezoidal teeth and peace teeth, and the grinding is more complicated. When sawing, the utility model can reduce the phenomenon of overlaying and cracking, and is suitable for sawing and cutting all kinds of single and double facing artificial boards and fireproof boards. Aluminum saw blade, in order to prevent adhesion, but also more flat teeth with more teeth.4. ladder tooth often used for cutting saw blade trough, in artificial plate sawing double veneer, adjust the thickness of the bottom surface of the groove saw complete grooving, the main saw complete plate sawing, cutting edge to prevent the occurrence of collapse phenomenon.
In summary, sawing wood, particleboard, MDF or tooth, can be sharp wood fiber cut, cut smooth; in order to keep the grooving bottom flat, with flat tooth or flat composite tooth; sawing plywood, fireproof board generally choose ladder flat teeth, is expected to open the computer the sawing sawing rate, diameter and thickness of the alloy blades are relatively large, about 350-450mm in diameter, 4.0-4.8mm in thickness, most of the ladder flat teeth, in order to reduce the edge collapse, saw.
How to choose the profile of alloy saw bladeThe tooth shape of a commonly used alloy saw blade tooth (alternate teeth), flat teeth, ladder flat teeth (low gear), trapezoidal teeth (inverted conical teeth), dovetail teeth (Tuo Fengchi), and industrial grade does not see more of the three left and right, left and right flat teeth etc..
The whole tooth tooth alternately around the turn, is used in the wood. The ladder tooth, generally used for cutting aluminum. So choose what kind of tooth shape is based on what cutting material to choose, and not good or bad points.
