Which two transistors are the driving tubes of the induction cooker?
Different electromagnetic stove, drive tube name, serial number, model is not the sameTo see what your specific electromagnetic oven model isIn general, the direct drive disk is a three foot and is mounted on a heat dissipating aluminum block called a IGBT field tube (such as: FGA15N120, FGA15N120)This tube is also driven by a triode (such as s8050, s8550)
Since the drive tube is connected to the power tube and the power tube is on the heat sink, the drive tube is generally located near the heat sink.Generally, the direct drive disk is a three pin and field tube (FGA15N120, FGA15N120) called a IGBT, which is mounted on a heat dissipating aluminum block.
Electromagnetic oven main board on the small number of transistors, generally only 35, of which there are two transistors are close to each other, they are a pair, this pair is the drive tube.Drive to pipe model is generally 8050, with 8550., the remaining pipes are 8050.The drive tube is connected to the G pole of the power tube via a 10 resistor.
