Who will set the DMX512 keyboard is to control the shake head lights hurry ah?
DMX-512 programming instructionsTurn on the power1, open the power supply, wait for about 5 seconds to show "101", press the "program" button for about 3 seconds into the programming state, corresponding to the digital screen "program" indicator light flashing;2, press the "bank" button up and down to select the program number to edit;3. Select the light number to control. Press the numeric key under "scammers";4, set the lamp the function of the data (i.e., push "scenes" under the fader to the desired position);5, press the "midi/add" button, and then press the "scenes" under the 1 key, the surface of the board all the flashing a few times, such a scene is set up;6, choose to control the lights, press the "scammers" digital key below, the function setting lamp data (i.e., push "scenes" under the fader to the desired position), click "midi/add" button, click the "scenes" followed by 2... 8 keys, each program can be compiled 8 scenes, compiled by the "program" button, about 3 seconds to exit the programming state, the program will automatically store.
TQ5{$~ V0M I IB, in programming state, for SCENE and CHASE programming;14, TAP, SYNC/DISPLAY keyA. (1) in the AUTO running state, the last two times press the TAP SYNC/DISPLAY key to determine the speed of SCENE operation, the maximum time is ten minutes;(2) not in the AUTO state, converting 00-255 or 0%-100%;B. in programming state(1) when CHASE is programmed, there is a conversion between the step display and the BANK display;(2) not converting 00-255 or 0%-100% when CHASE is programmed.
Chases programmingCHASES programming is the combination of multiple programs as a program, running CHASES will run inside the program1, in the program well, according to the "program" button for about 3 seconds into the programming, the corresponding digital screen "program" light flashes, you should choose the programming of the CHASES press, digital tube displays 1101 or 2101 etc.;2, press the "bank" button up and down, select the program number to be programmed into the CHASES;3, press the "midi/add" button, and then press the "scenes" under the 1 key, the panel all the lights flashing a few times;4, press the "midi/add" button, and then press the "scenes" under the "2 health", the panel all the lights flashing a few times, so repeat the procedures inside the edited scenes stored in the CHASES;5, and then press the "bank" button up and down, select another to be programmed into the CHASES program number;6, press the "midi/add" button, and then press the "scenes" under the 1 key, the panel all the lights flashing a few times;7, press the "midi/add" button, and then press the "scenes" under the "2 health", the panel all the lights flashing a few times, so repeat the procedures inside the edited scenes stored in the CHASES;8, you want to weave into the CHASES program are compiled, press the "program" button for about 3 seconds to exit programming state, the program will automatically store.Operation of ChasesTurn on the power and wait for about 5 seconds digital display "101", click the CHASES key you want to run, click "auto/del" button that will run the program, adjust the "SPEED" and "FADE TIME" fader can change the running speed and time, click "Blackout" button will enter a suspended state.Please pay attention to what is the indicator light of the digital screen when you operate it
Function1, open the power supply, wait for about 5 seconds, digital screen shows "101", press the "bank" button up and down to select the program number to run;2, click "auto/del" button that will run the program, adjust the "SPEED" and "FADE TIME" fader can change the running speed and time, the program can be run in the press "bank" on the key to run the program, click "Blackout" button will enter the suspended state.delete1, open the power supply, wait for about 5 seconds, digital screen shows "101", press the "program" button for about 3 seconds into the programming state, corresponding to the digital screen "program" indicator light flashing;2, press the "bank" button up and down to select the program number to be deleted;3, at the same time press the "auto/del" and "scenes" under the 1 key, the board all the lights flashing a few times, to prove that the first scene has been deleted;4, at the same time according to "auto/del" and "scenes" under the 2 key, the board all the lights flashing a few times, to prove that the second scenes have been deleted, so repeated to do, you can delete the 8 scenes.
