The toilet water pipe valve is broken, with a new twist, how are the screw does not move, then they told me to go on to the pipe on the water and then tighten, did as he said, really screwed, but do not know why, please tell the master what is the principle, if it is water without water when the screw does not move, but when the water can twist. What a kink!Is the water valve normal, a pull rod, pulling it back flush, do not rush the kind, the middle is a hollow ball
I think it should be the water holding gas, connecting device principle, at the bottom of the hand, barometric pressure, and the best you can last map, I'll see
You are too weak, or else you are not in the right direction.
This is because the ball valve in the factory after the test pressure, after the ball valve pressure test, there is a vacuum, and the ball core and gasket pressed.When the pipe is loaded, the ball core and the sealing surface are slightly moved by the water pressure, so the taxi is opened. There is no vacuum in the inner part of the opening. Ball valve is good to use.A pressure test valve is not open for the first time.
