Why can't the ordinary pan be used in the induction cooker?
What cooker can not be used in induction cooker?After understanding the electromagnetic oven most suitable for pot pot, so what better description should not be used in electromagnetic oven, such as ceramic, aluminum, glass and copper material of the pot is not suitable for use in the electromagnetic oven, in addition, the bottom of the pot diameter of less than 8CM certainly is not suitable for the electromagnetic oven, of course, that is not specifically for the compound bottom pot and the bottom of the pot bump height of more than 2CM of the electromagnetic oven with pot is not suitable for the electromagnetic oven cooker.
Therefore, it is suitable for electromagnetic oven cooker has the following categories: iron pots, the pots containing enamel pan, cast pot, stainless steel wok, stainless steel pot for electromagnetic oven with compound bottom pot, and usually, the bottom diameter should not be less than 8CM. The reason is that if the pot is not up to the minimum diameter of 8CM, the electromagnetic oven can not work, in addition, because once the maximum diameter of the electromagnetic heating, magnetic field is 2226CM, so in this magnetic field is the most suitable pot.
What cooker does the induction cooker use?Because of the electromagnetic furnace with smoke, no fire and no exhaust, easier to use, so it has become the most people's kitchen preferred, but a little more bad is the electromagnetic oven have radiation is relatively large, so to reduce the electromagnetic radiation of the furnace must start from the pan. In general, the electromagnetic furnace into cast iron products, stainless steel products or enamel products, while the shape is usually can only use the pan and may use the pan with a round bottom pan two, electromagnetic oven for its ideal pot material usually need to iron or steel products, the reason is that this kind of material by high temperature heating, the heating load and the eddy current can more matches, with relatively high energy conversion rate, so in this way, the corresponding magnetic leakage situation will be less.
