Home > categories > Minerals & Metallurgy > Aluminum Foils > Why did Condi Rice lie about Iraq having aluminum tubes to enrich uranium?
Question:

Why did Condi Rice lie about Iraq having aluminum tubes to enrich uranium?

Why did Condi Rice lie about Iraq having aluminum tubes to enrich uranium?

Answer:

In short, noEven if you had a great deal on injectable foam insulation, there is simply no way to get that foam everywhere it needs to beThere are always studs wires, blocks and pipes, nails, and more that can get in your way, as well as the existing insulationYou will need to drill hundreds of holes on the outside walls, and that is never a good ideaEvery one of those holes is an invitation for moisture intrusion, and that is never good, and you will never get 100% coverage of the insulationIf you did it from the inside, you would have paid for new drywall by the time you finished patching it allAnd you will only get about 70% coverage, at bestEither way, this is not a good ideaThe companies that say it is should be shut down, for lyingYou should concentrate first on your ceiling and floorIf there is adequate access for both, it is not too hard to doAnd also, you can make sure all of the existing exterior wall intrusions, like doors and windows are properly sealed with caulkHave your windows and doors upgraded, if you can afford itBut, please avoid messing with your exterior walls, unless you want to redo your interior walls, and do it right.
Adding Insulation To Existing Walls
This Site Might Help YouRE: Is it possible to foam insulate a house without removing all the drywall? We bought a beautiful home in October, but didnt realize this house only has about 1 1/2 quot; of roll fiberglass insulation in the walls and ceilingNeedless to say, its freezing in here and our propane bill is upwards along $800 a monthWe have to insulate before next winterIs it possible.
Simple answer noSlightly longer one: To use batts of insulation you have to rip out the dry wall lay it in and re-do the drywallLess invasive: cut a hole at each void in the wall and spray in the insulationLeast invasive: If you have attic access, and you can access where the voids are in the wall from above - you may be able to spray insulation in that wayFor my money and the least aggravation, cut a hole at each void and spray it in.
Maybe because clintoon lied But will a neocon like yourself admit that

Share to: