Why does cylindrical roller bearings fail abnormally?
Generally, the causes of abnormal failure of cylindrical roller bearings are as follows:1, cylindrical roller bearing manufacturing accuracy is poor, one end of the bearings with loose, and travel source is larger, bearing frame rigidity is poor. Or the bottom of the bearing seat is uneven.2, cylindrical roller bearings axis misalignment (misalignment) axis and the housing of the shoulder to the surface is not vertical, shell installation, bearing two or more holes, different axis.
5, improper reinforcement of uranium bearing seat, so that the bearing capacity of the axle is uneven, the bearing seat is provided with holes, or some fasteners, such as a compression screw, etc., are supported, and the supporting parts are provided with grooves or printing places near the roller track of the cylindrical roller bearings.
3, the rigidity of the shaft is poor, too large bending occurs under the load, and the span of the fixed end of the cylindrical roller bearing two is larger. When the temperature rises, the thermal elongation of the shaft causes the bending of the axle static property.4. The assembly surface falls into the hard particle or the dirt, the stress concentrates, to the open bearing pedestal when clamping, the cylindrical roller bearing ring clamp flat.
