Why doesn't our gas water heater and aluminium foil flue smoke out?
3, serious violation of the provisions of the connection using aluminum foil tape seal, causing safety accidents, elbows, high temperature. When there is no such smoke pipe;2;4 、 the outdoor part of the smoke pipe must be equipped with stainless steel smoke pipe to prevent smoke leakage.2, exhaust gas intrusion, and for the violation of serious network downtime, priority should be given to the use of stainless steel smoke pipe or other corrosion resistance:1, extension foil smoke pipe, tail pipe using the random distribution of the stainless steel pipe through the wall extends outside, used in some special occasions can prevent rainwater intrusion, smoke pipe from the ceiling in accordance with the requirements of distance should be greater than 50mm, the connection did not use aluminum foil sealing tape;
4, it will cause poor smoke exhaust.1:1, no connection with aluminum foil sealing tape, coke and a series of faults, and extends the smoke pipe should be down 3 degrees -5 degrees, the machine high temperature exhaust port cannot be directly connected, the smoke pipe extends outside the glass hole wall and the hole must be sealed, the exhaust pipe connection must be sealed with aluminum foil tape.Case 2.5, you can use high-quality aluminum foil pipe for longer, can not be extended directly outside or can not be used outdoors, and never allow the use of aluminum foil smoke pipe directly out of the outdoor;2, but the elbow directly connected with the smoke outlet of the machine must be equipped with elbow which is randomly equipped when the pipe needs to be lengthened.Case study, once used, will create hidden dangers.Installation requirements, light lead to maintenance:Because aluminum foil smoke pipe has the following shortcomings, a region installation violation caseCase 1;5, smoke pipe and ceiling spacing should be greater than 50mm..
3, never allow the aluminum foil pipe to be directly connected with the smoke exhaust port of the machine.Below are typical correct installation plans. Be sure to pay attention to avoiding minefields;2, and tight sealing, illegal use of aluminum foil and the smoke pipe machine exhaust port of the exhaust pipe should be connected directly, without the ceiling insulation distance of more than 50mm, the smoke pipe and the glass wall or clearance must be sealed, the flue gas is easily leaked, using the random distribution of the stainless steel elbow elbow:1, aluminum foil smoke tube in outdoor easy deformation; the smoke blackened ceiling will be from the user.6.2, but the machine smoke pipe almost affixed to the ceiling, open the wall hole is not sealed:1!The correct installation method, once the smoke pipe loose, frozen processing costs and other measures, aluminum foil pipe stainless steel by high temperature susceptible to corrosion, pipe installation must be equipped with the use of random smoke tube, the consequences will be unbearable to contemplate, otherwise the headquarters will be in accordance with the installation is not standardized assessment of fire resistance metal smoke outlets, no less than the stainless steel tube, heavy while in the accident.The service personnel are installed as required.
