Home > categories > Mechanical Parts & Fabrication Services > Filter Cloth > Why is filter board filter cloth easy to break, what method can prolong the service life of filter cloth?
Question:

Why is filter board filter cloth easy to break, what method can prolong the service life of filter cloth?

Why is filter board filter cloth easy to break, what method can prolong the service life of filter cloth?

Answer:

Filter cloth itself is a waste product, bad is normal.Points for attention of filter press filter cloth:1. filter cloth should not hang too loose or too tight, too loose, easy to dust, too tight, easy to pull bad.2. old bag should not be mixed, to avoid damage to different time affect the normal work of equipments.3. replace the filter bag, first use compressed air blowing, and then check whether there is a broken hole, there are broken holes repaired, to be replaced. If the filter bag that is stuck by dust, rinse with water and replace after cooling.4. filter cake suitable thickness stop, unloading cake after work, so as to extend the service life of the filter bag.5. change bag cannot buckle down bag with a hard object, using force in the sewing bag with auxiliary pull.6. when the cake is removed, the cake removing tool shall be parallel to the filter cloth to prevent damage to the filter bag.7. when the filter cloth is installed, the filter cloth on the frame shall be made smooth and fixed so as not to damage the filter cloth when the frame is pressed.8. the time of the filter cake sticking to the filter cloth should not be too long, and the deformation and sagging of the filter cloth will be caused by too long time.9. filter cake should be filtered along the direction of the filter cake. Precautions for the use of belt filter press:The length of filter cloth (including the length of joint) should be correctly measured.When stitching, make sure that the ends of the weft are coincident or parallel, so as to prevent the filter cloth from running off when running.Interface should pay attention to the direction of operation, so as not to block the filter cloth interface and damage the filter cloth or to prevent the filter cloth forward. The belt filter arrow indicates the direction is the direction of operation.
1 、 Analysis of the damaged parts of filter cloth, is it due to improper processing?.2, filter cloth materials properly selected, no?3, the filter board plane processing accuracy?4, filter cloth cleaning frequency?
Filter cloth itself is a waste product, bad is normal.Second, what you say is bad, and how long is the service life? You have to tell us thisFinally, you really want to know about the filter cloth and suggest you consult the filter manufacturer in the rooftop.We are the filter cloth from the rooftop Hui filter cloth, and we use it very well

Share to:

Hot Tag