Why is the carpenter's circular saw fitted with a shield?
Safe use of circular sawsAfter starting, the material can be sawn until the speed is normal. When feeding wood will not sway or high up, to meet a slowly feeding. The length of sawing shall be no less than 500mm. When approaching the end, push bar feeding is applied.The operator shall not stand in the direction of the centrifugal force in which the saw blade is rotated, and the hand shall not cross the saw blade.When the film temperature is too high, apply water cooling.
The top of the saw blade shall be provided with a protective cover, and the bottom shall be provided with an individual shaped plate slot to prevent the sawdust from splashing and the saw blade crushing and wounding.4, sawing machine panel should be smooth and lossless, the width of saw slot is not greater than the thickness of saw blade plus 20mm.5, accumulation of wood dust should be cleared in time, the operation site is strictly prohibited fireworks, and equipped with fire equipment according to regulations.6. Woodworking machinery
A crack in the saw blade (length not exceeding 2cm) can be drilled at the end of the crack. The saw blade must be replaced when there are 2 continuous broken teeth.
That is to prevent the operation of debris and other things splash on the human body.1, the circular saw should be placed smoothly, must use one-way switch, must not reverse start.
