I bought a semi automatic espresso machine Eupa, generally used for espresso coffee machine, coffee powder is milled to a point, but every time I wear a bit thinner, water machine was not arranged, and a long before I have a cup of coffee, and I used to wear the bean machine is just the kind of very simple, less than 100 dollars, can not wear very fine, what really is I wear too out...I mean, I use the same coffee beans, grinders, cups, and machines. If you grind a little bit more, the water will be off and on, and if you wear it rough, you'll be fine. But the problem is I know for the espresso machine should be worn some fine powder, and I know that I haven't worn too fine, because the bean grinding machine is not so good ~ ~ ~ I feel so rough surely some of the water, but I feel so rough is wrong, even half a beans large particles, this is a waste of coffee beans, simply doesn't taste good coffee
Is not broken, may you grinders, milling is not uniform, causing part of the particles are too small, the filter clogging. Usually the rat tail is just fine!There is your cup, many large, if the big cup, is a long time oh.
Coffee machine of different brands, different brands of beans, grinding powder is not the same, the water is not suitable for two reasons, one, two, or powder, coffee machine, the hand of the powder pressure tight, water is not smooth, powder can be appropriate coarse grinding, coffee machine 10 seconds flow water, switch to turn off the water, re powder!!! It takes 20-35 seconds to make a perfect cup of coffee!!!
Hello, maybe you grind the coffee beans too fine. The brewing unit is blocked. The coffee thickness should be adjusted according to your coffee ware, and the siphon grinder is placed on the 2.5 scale. The semi-automatic coffee machine is a little bit thinner. Your powder is not the reason for the machine,
1., the fine coffee powder, the demand for bean grinder, coffee machine also has greater requirements. The beans should be finely cut. The coffee machine is under great pressure.2. Due to poor water: because it's too fine coffee powder, coffee is installed in the shell, the relative density is high, and the water after bulking up on a wall in airtight, only more pressure to make water through coffee powder. The longer the time, the more liquid coffee powder, water capacity is even worse. If you always do so, the machine will go ahead. If the machine is not good, the boiler may explode.This is the difference between a good machine and a bad one.3, so the powder does not need to grind too fine. If the coffee machine is not good, (under 1500 dollars)4. The coffee machine makes no more than 25 seconds.Have you ever noticed that water has just started to flow quickly?. Because the powder starts loose and doesn't absorb too much water. So water permeability is better.
