Why should the gas bottle wear the best safety helmet?
Fracture of the neck or the bottle valve caused by the consequences, high pressure gas bottle is out of control, the high pressure gas jet, its reaction to the opposite direction to the cylinder speed can make the machine equipment, the building is damaged, even causing casualties, high-speed jets of gas bottle should be determined by the nature of the gas in the bottle and bring two times more serious accidents (such as fire, explosion, poisoning, etc.). If the bottle is filled with flammable gas, the static electricity generated by the violent friction of high speed jet or other fire sources can cause combustion and explosion.
Because most of the bottle cylinder valve is made of copper alloy, is relatively weak, although some are made of steel, but because of its fine structure than the bottle body, the bottle body rotation in the above make a right angle to form a bottleneck and the bottle valve joint, it is not only the bottle is fragile, the most prominent point of the bottle. Susceptible to mechanical damage or external shocks. In the course of handling, storage and use, due to careless damage, falling, falling, rolling or other hard impact of the gas bottle, it is easy to break the joint between the bottle valve joint and the bottleneck.
A cylinder for filling various gases, and a bottle valve for controlling the passage of gas through the bottle mouth. Wear a cap on this bottle valve to ensure that the bottle valve is not subject to mechanical damage and to ensure safety. It is an important accessory to the gas bottle. It is called a safety helmet.
On the other hand, bottle valves are exposed outside and are easy to break into dust or grease during handling and storage. Wearing a helmet prevents dust or grease from contamination and invasion.In order to eliminate the risk, so the requirements of bottle units in the factory must be equipped with safety cylinder cap. When the gas safety cap into the fixed location, after using in time to wear cap screwing, do not throw. Don't forget to wear a safety helmet when handling or loading and unloading. The inflator shall not inflate the cylinder without a helmet.
