Why the WLAN network switch and data flow switch automatically open when charging
2: mobile phone system problems: (this problem is not the case) because the original system is detected thousands of times or more times.
To say the system really a lot of reasons: here is not one by one explained.
There are two ways to solve the problem: a recovery of mobile phone initialization (this move on the success of the system problem as high as more than 75 percent)
Two brush machine, so that the phone back to the original system state, or replace the system (Brush a lot of shortcomings do not explain)
If the phone did not have a warranty period: do not brush machine, and directly take the warranty (should be the phone if the brush machine or ROOT, then manufacturers will say it is "man-made damage to the system or mobile phone, not within the warranty")
I was the first reason for the design of the defective victims, each time a plug in the data line phone will be bruised mess.
Later know that you can warranty. The results take the warranty, I ROOT. Manufacturers said I was man-made damage to the system, not within the scope of the warranty! (depressed)
The reason for the automatic opening
1: mobile phone design flaws (generally occur in the ultra-thin mobile phone) should be too thin space for mobile phones, manufacturers in mass production will inevitably encounter some of the components of small flaws. Cause a problem with the phone!
But this phone will generally be detected, only a very small number of mobile phone detection errors (if so, you really luck)
Method: Warranty
Suggest you try to update the phone system or try to clear the phone data look, hope to help you
