Will the car film paste it can be posted outside the glass out of it
Car foil is to be affixed to the inside of the car glass, the reason is very simple and then there will be no wind inside the rain, the use of the film will not be too much external interference, because the film stick to the wind, Baptism, sure that the paste is very strong, the use of the inside will not be affected.
As the film is attached to the inside of the car glass, so the wiper will certainly not scratch the glass film, because the wiper is outside, when the car film does not have to remove the car glass, if it is so the film is too dangerous , Accidentally broken glass had to pay their own money.
Of course, this is a digression, car foil is actually a very technical content of the work, much more difficult than the building film, because the car is a curvature of the glass, and architectural glass is not much curvature, a film cutting After a good glass according to the curvature of the glass and stereotypes, and then accurate cutting film, and then is the inside of the film.
Car film film, especially as the master ZZ Z70 top metal front file of this good film - magnetron sputtering film, the baking sheet is very difficult to bake, because the film to take into account the film will not be damaged, can not be uneven , There is a metal film, especially the metal layer more membrane (no pollution, will not distribute formaldehyde and other substances, no additives, long life, the use of good results and a long time, the warranty is more than 8 years) More difficult, but the membrane stability is very good.
The current market, a lot of garbage film, such as dyeing film and heat-absorbing film, there are a lot of people say that will not recognize, in fact, the characteristics of these garbage film I said many times, and here once again repeat:
Characteristics and hazards of poor quality membranes:
1, opened the transparent layer when you can smell the pungent odor.
2, start with the effective, long time can not be very good insulation, separated by ultraviolet light. (Poor insulation film in the adhesive against a little heat insulation chemicals and anti-ultraviolet chemicals, use a little longer or too high heat, it will soon be distributed or the reaction, loss of function)
3, the use of glass film in the process of fading, cracking, blistering and other conditions.
