Home > categories > Construction & Real Estate > Brick > Will the construction of rural ordinary residential 1 square need the number of material brick reinforced concrete sand and gravel
Question:

Will the construction of rural ordinary residential 1 square need the number of material brick reinforced concrete sand and gravel

Will the construction of rural ordinary residential 1 square need the number of material brick reinforced concrete sand and gravel

Answer:

Under normal circumstances, the construction of rural residential buildings in one square meter of the amount of material: 1. Steel 9.6kg, diameter bottom bar Φ8 spacing two-way 150cm, negative bending moment Φ8 spacing 150mm, distribution tendons Φ6.5 spacing 200mm2 cement 42.7kg, Marked 32.5 grade, concrete label C303. Sand 52.5kg4. Stone 128.6kg5. Cast-in-place floor around the ring beam main reinforcement 4Φ. stirrup Φ6.5 spacing 200mm, ring beam section 240 * 300mm
(The use of brick to see your wall area) Reinforcement 30KG / m2 (floor translation thickness of 22cm, the thickness of the rural floor is generally 15cm, because the brick and concrete is the same as the brick Of the beam is not much, you can press 22/15 to convert) concrete 0.3-0.33m3 / m2 you calculate the above data can be the basic material data, as sand and gravel depends on how you match, if According to the market price, the current wage is about 150 yuan per square or so, so the labor costs and material costs are known, probably can know the cost.
This is the more complex key is to see how you want to design? Is brick or concrete pouring? And then you have a lot of things and your architectural design is a relationship you say is not it? The

Share to: