Thank you, find the answer!Senior fellow: for different grades of steel requirements with what electrode problems, I have learned. What I want to know now is whether there is any requirement for the power of the welding machine with different welding electrodes If there is, then this requirement is clear on the specification, or the actual operation of direct existence? If not, is that possible as long as the DC welder is available? For example, the site construction operation radius of 53m, then we have to choose more than 55m and tower type. Troublesome seniors!
No, it's better to have DC welder with a maximum rating current of 400
E43 * * type is used for the connection between grade HPB235 steel bars and grade HPB235 and grade HRB335 steel bars.E50 * * type is used for the connection between grade HRB335 steel bars and grade HRB335 and grade HRB400 steel bars.E55 * * type is used for HRB400 grade steel barsThe reinforced material should be consistent with existing national standards, "the reinforcement of concrete hot rolled round bar" GB13013, "the reinforcement of concrete hot rolled ribbed bar" the provisions of GB1499, welding connection reinforced in the formal welding must according to the construction conditions of welding, welding process and quality according to the current standard of "national specification for welding and acceptance" JGJ182003 execution. Cold rolled ribbed steel bars are forbidden to be welded. All steels and bars shall be certified by the factory or qualified reports, and shall be checked and accepted according to the relevant national standards.
Specific requirements for you to see what the problem of choosing motor electrode, are required, what do you use for electrode current and what specific requirements, the electrode that has will help you choose what what current high current motor
