I guess what is the USB driver I put a mouse plugged in. He said to install the driver said the results of what but I failed to install with the driver wizard Master Lu what inspection said the sudden death of the normal driver how to do ah thank you for help!!!! If reinstall the drive what trouble, send a driver installation software to me, really bored to death
1, there may be a system card, this time to wait for the response of the system, if there has been no response, said the crash, can press the power button to boot, wait for the computer shutdown and then reboot, or press the reset button reset.2, there may be the computer because the operation of large procedures caused by the USB power supply suddenly problems, this case, generally canceled the system can be. If the motherboard is not very stable, you can plug in the USB device in case of power failure, and do not plug in when the computer is running.3, there may be hardware equipment problems, such as USB interface broken, the mouse can not be used, this situation can only replace the device.
First uninstall your USB driver, and then correspond to your computer model, re download your driverIf this doesn't work, it's recommended that you reinstall the system, and then don't install the driver to see if it can be identifiedFurthermore, there may be insufficient power supply for your USB. I suggest you try using other USB interfaceGenerally, there are only two possibilities. One is that computers cannot recognize USB devices. Two is the USB device, not recognized by the computer.Also, you need to see your device manager and see what's on the tipThis is your computer problems, there is a virus, but this is generally not your computer mouse, so this is unlikely, but not necessarily not, so you need a step by step outIf there is signature authentication, you can cancel it in this stepFirst, right-click the "my computer" icon on the desktop, and click the properties command in the pop-up menu, which opens the "system properties" dialog box.Select the hardware tab, and then click the "driver" in the "driver signature" button, select "ignore - install the software in the pop-up dialog box, don't ask for my approval (I)", then should pay attention to the "system administrator option" under "the operating system as the default application (D)" before the check box is selected, and then click "confirm" button to exit, then you can install the device driver
Download a driver life, installation, and then he will automatically scan the installation of various drivers, not only USB, are loaded, and the end of the restartIf it doesn't work, the control panel -- Device Manager -- finds the universal serial bus controller -- each of which points to the point where the "enable" word is enabledNo good, it may be USB port or motherboard power supply problems
