have black (hot) and 2 whites from the house. Got Black,green.blue.and white from the fan. Any clues on how to wire this? There is a light switch involved. I know to match the colors but what do with the blue (light) wire is beyond me.
Mark is Correct except for one thing that caught my attention: you said you have 2 White Wires and 1 Black Wire coming from the house.....WHY 2 White Wires and only 1 Black, Doesn't add up Correctly, unless one of those White Wires was marked with a piece of Black Tape to identify it as a second Hot Wire which would then be used to separate the Fan Motor from the Fan Light by each having its own separate power source.......Be Careful!!
The blue wire is the supply connection for the fan motor, simply connect this wire to your homes black wire. ( blue and black from fan) to the black wire in the box. Splice the two neutral ( white ) wires together. If you plan on using a dimmer switch use one with motor control. Green is your ground connect it to the bare copper wire in the box or screw Its a good thing you picked up on that white wire at first glance I was thinking the fan had 2 whites, .. You will have two switches if one of the white wires in your box is a switch leg, if there is two switches, make sure you separate the wires in the ceiling box, place a marrett on each individual one for safely, turn the switches on remove one marrett a time test with a multimeter white to ground to identify you hot and neutral
