With the end milling cutter, the surface quality of the milled surface is better with both side and bottom blades Seek explanation...
The end mill, of course, is better with the side blade, and the bottom blade suggests the use of flying knives
The quality of surface milling is mainly reflected in the following aspects: flatness, roughness, dimensional accuracy and so on. The side edge of the end mill is different from the end cutting. The shape precision of side cutting the processing surface of the plane depends directly on the side edge of the side edge when the plane itself, wear after processed is uneven, and the tool wear degree of different radial cutting force is not stable, directly affects the precision of machining tool, so the requirements of high end; when is on the edge of the blade machining tool from the rotation center of the farthest point turning trajectory to form the processing surface of precision machined surface shape precision depends on the machine (such as the spindle axis relative to the vertical workpiece feed direction, etc.) the requirements of the tool is low, to facilitate the tool selection of new materials, can get high flatness, roughness, dimensional accuracy. To sum up, in the processing plane, it is recommended to use the end cutting method as far as possible.
Copy again, landlord, I built the meaning of the side with tolerance to go slow down, plus milling (turn, hang, go, knife), as to how many knives, then look at you, we are a milling casting, 475475 speed, knife, 160 of the cutter
