Wooden curtain box construction process which
Wooden curtain box
????? Embedded parts inspection and processing → curtain box semi-finished processing → installation curtain rail and curtain box.
The overall elbow is made. Advanced building stairs with integral elbow. Before production to do enough model, according to the model line, with a narrow saw saw the shape of wool (wool size is generally greater than the actual size of about 10mm). When the elbow is bonded, the atmospheric temperature shall not be lower than 0 ° C. Elbow under the groove should be closely tied with the railings flat iron, not loose. Wood screws should be drilled and then screwed into, not directly into the hammer, nail cap should be flat.
???? Refurbished planing. Joints bonded firmly, in accordance with the wooden handrail slope, shape, with a flat shovel will be the initial processing of the elbow, and then a small iron planing planing. It is not easy to use the location of the plane with a file file file, file light, so that the slope of the right, bending nature, and finally with wood sandpaper.
Staircase wooden handrail
????? Install the handrail and start the elbow. Installation of handrails should be carried out from the bottom up, first in accordance with the railing slope with a good starting elbow, then arm, the height to meet the design requirements. Armrest and elbow joints to be underneath the dark tenon, or with iron live riveting solid, with adhesive bonding. And wood rails connected with the wood screws should be tightened, nuts shall not be exposed, the spacing shall not be greater than 400mm.
When the width or thickness of the wooden handrails exceeds 70mm, the joints must be made of dowels.
