Working principle and operation instructions of vacuum oil filter for oil press
The water vapor entering the condenser is cooled and then returned to the original water. The oil in the vacuum heating tank is drained into the static filter by the oil pump and filtered out by the filter oil paper or filter element. Thus, the whole process of removing impurities, moisture and gas in the oil by the vacuum oil filter is completed, so that the clean oil is discharged from the oil outlet.
Vacuum pump to vacuum tank air to form a vacuum, outside the oil under the influence of the atmospheric pressure through the entrance pipe into the primary filter, remove larger particles, and then into the heating tank, heated by 40 degrees to 75 degrees of oil through the automatic oil float valve, this valve is automatic control into the vacuum tank of oil import balance, after heating the oil whirl through the spray wing separating oil into a mist, oil and water in the rapid evaporation of water vapor into the vacuum pump and continuous inhalation of condenser.
The vacuum oil filter is designed according to the different boiling points of water and oil. It consists of a vacuum heating tank, a fine filter, a condenser, a primary filter, a water tank, a vacuum pump, an oil drain pump and an electric cabinet
