Home > categories > Construction & Real Estate > Other Flooring > anxious! How did the wood floor be blistered?
Question:

anxious! How did the wood floor be blistered?

Last week, open the windows ventilation, the results of empty morning, noon suddenly under the rain, the window was part of the rain soaked up, how to remedy? Let it dry naturally Or can take other means, such as the use of electricity can blow it? More

Answer:

Last week, open the windows ventilation, the results of empty morning, noon suddenly under the rain, the window was part of the rain soaked up, how to remedy? Let it dry naturally Or can take other means, such as the use of electricity can blow it? More
The floor uplift is due to the expansion of the floor after the damp, the volume increases, and the floor tightly assembled together can not make it stretch, it can only upward expansion and arches. Specific reasons there are the following aspects: 1, the floor was blisters: the floor was soaked, the floor volume increases, causing the floor uplift. 2, laying too tight: the laying of the floor is dry season, tongue and groove shot too tight, when the environmental humidity soared, the floor with the increase in environmental humidity expansion, due to the assembly of tight, nowhere to extend, 3, between the wall and the floor without leaving the expansion joints or stay too small. 4, the floor is dry, moisture content is too low and so on. Seen the reasons for the uplift of the floor, you are not on how to solve some of the concept of uplift it? Below, Xiaobian to teach you after the laying of the floor, to solve the uplift approach. 1, in case of floor uplift, should first remove the skirting board, and in the arrogant place with electric circular saws cut a knife, so that it will not continue to expand and then arch. After cutting the floor should be observed for a day or two, if no longer arch, you can saw the floor of the floor into a new floor. 2, if the floor arches serious, should be removed after the skirting board, remove the old floor, re-laying. In the demolition, if the floor surface is damaged, should replace the new floor. Learning so much about the uplift of the knowledge, I believe that in the future encounter similar problems will be able to solve their own. However, the demolition of the installation floor, after all, will be time-consuming and laborious, the owners need to be careful in life, try not to sprinkle the water on the floor is.
Some of the floor do not have to go to it, time can be automatically restored. Poor can not, and only for the change
Since the landlord admitted that because they did not close the window led to flooding the floor bubble, the responsibility should be the landlord you! Now need to remedy the measures are: First, with cotton material to absorb the surface of the water surface, to maintain ventilation, with fans and other auxiliary equipment for "dry" treatment. If the problem is serious then you need to remove the flooded floor! For the flooding is serious, it is recommended that the landlord to call the dealer, let it send someone to identify, if you choose this floor (should strengthen the floor?) Manufacturers quality assurance, it is possible over a period of time slowly Shrink or even eliminate (see the size of the bubble and the length of the immersion), I wish you good luck. ^ _ ^

Share to: