I have a 2002 Trailblazer LS and the car alarm keeps going off 5-10 minutes after I park it and lock it with the remote. I have no idea what could be setting it off. The remote to the truck isn‘t in the hands of little ones or anything like that. Any ideas?
The brakes will work as a non-ABS brakes. Good luck.
If your alarm is a good brand it will have a test system (after you turn on the key it will flash a number of times to indicate which sensor is firing) Check the manual or go to their web site for diagnostics.
Check your doors to make sure they are closing all the way. I know it sounds silly but if the little button in the doorjam isn't pressed in all the way then the alarm will think your door has been opened. If slamming the door helps then just put some electrical tape over the button and a piece where the button meets the door and try it. I had to do it on my crx. Also it could be just too sensitive.
WITH ABS IS DISCONECTED IT WILL BE LIKE A CAR WITHOUT ABS
lots of the time the subject is with the sensor because of the fact that's the main vulnerable. between the hassle-free and immediately mounted problems with GM truck is corosion below the sensor pushing it up adequate to lose the analyzing from the hub. If it extremely is the perpetrator that's mounted with the aid of heavily removing the sensor, plugging the hollow with something which will GAURANTEE no airborne dirt and dust or rust gets into the sensor hollow and cleansing the rust from around the area. do no longer GRIND the steel down as you have in user-friendly terms a milimeter or so room for blunders for this reason the technique of rust to %. your sensor up adequate to holiday the code. I extremely have achieved this on numerous one million/2 and 3/4 ton GMs with out issues. no count if that's no longer this then examine the wheel bearings. it extremely is yet another area which will reason the comparable concern. What facet is tripping the code? that's the place to start up. 45K isn't alot of miles for a wheel bearing yet my step-daughter and that i the two have had our new GMs in for wheel bearings with below 30k. they somewhat do no longer make 'em like they used to. better of luck Pat.
