How do I remove the plastic 502 on the car?
1, you can use wet hot towels in the sticky 502 there. After ten minutes, the cured 502 will become soft, and then it can be removed. Also, you can drop a drop of 502 in 502 of the place, and 502 of the cured will become soft, so you can remove it with a towel.2, with insulating oil, pour the transformer insulation oil on the table, 502 glue will soon become soft, you can quickly rub off.3. Use gel cleaning.
Glue 502 glue on a small area. Just soak it in hot water. If a large area is covered with 502 glue, apply acetone, and so on, it can be removed in about 5~10 minutes.
502 glue is an instant glue, as long as you use dissolved organic solvents, such as acetone. But inhaling acetone is poisonous. Use it carefully. You can plug some of the glue into the bottle. But the key is to operate properly, if improper operation, it is impossible to achieve satisfactory results. We must first determine the contamination of the 502 adhesive clothing does not contain acetic acid fiber, can use acetone, scouring the best clothes to flip back, under the stain adsorption material cushion (clean cloth or towel, toilet paper, etc.) using the dropper will drop in acetone spots around, gradually from outside to inside dissolved, can also pad a layer of cloth, gently squeeze on help dissolve, then replace the adsorption material, repeat the above operation, until the completion of dissolution. In addition, acetone may have a bad effect on the color of some fabrics, so it is necessary to test it at the back angle and determine whether it will be used.
