How safe is the use of electric saws?
When the original article is cut off, should pay attention to the trend of sawing wood, quickly lift electric chain saw.12, transfer operations must first switch off the electric chain saw, the transfer is not allowed to run.
No line overload work, no access to high capacity fuse.7. Electric chain saws must be operated with both hands.8, the work must stand firm, not standing in the original strip or log below, and may scroll on the original line or logs on the operation.9, excluding the clip saw fault, should pay special attention to the safety of auxiliary personnel.10, in the course of operation, should be lubricated and cooled at any time sawing mechanism.
The operation of electric chain saws and the points for attention are as follows:1, when the processed original strip is less than 1.5m of the conveyor, no work is allowed.2 、 before turning on the power, the switch of the electric chain saw must be switched off to prevent accidental start.3, start the material before starting the electric chain saw, idling 1 min, check whether the operation is normal or not.4. When starting or operating, the hand and foot shall not be close to the rotating parts, especially the upper and lower parts of the chain5, when the fuse or relay trip, should be checked immediately.
