How to check the quality of construction of wood flooring?
Look at the size of the gap, the corner joints are dense, walking on the floor will not have sound, floor anti-skid performance, floor scratch degree. Whether the floor deformation, warping, acceptance method is 2 meters long ruler, against the floor, flatness should not be greater than 3 mm. More pumping a few measurements, if the pass rate of 80% or more as qualified, on the contrary, is unqualified. Sometimes we will find the floor from the arch: if it is solid wood flooring, it is due to shop too tight or the floor is too dry (moisture content is too low); if it is composite floor, that is poor quality floor So the floor arch is a serious quality problem. The baseboard gap between the base line and the floor surface should be in the range of 3 mm to 5 mm; kick line buckle Mouth height difference should be ≤ 1 mm.
Look at the shop flatness, the size of the gap to go foot feeling
Surface quality: Wooden board should be smooth and smooth, no planing, ballast and burr, pattern clear, uniform color paint layer. Seam quality: tight gap, the wrong position of the joints, the surface clean, straight seam In the bonding, to bond firmly, the surface clean, no overflow glue, the floor block arrangement reasonable and beautiful. Skirting line quality: Seam tight, smooth surface, height, wall thickness consistent, seams arranged reasonable appearance, It is easy to cut the wax, wax soft wax, wax cloth should not even reveal the end, smooth and bright, consistent color, uniform thickness , Clear grain, clean surface. Surface quality: Wooden board should be smooth and smooth, no planing, ballast and burr, pattern clear, uniform color paint layer. Seam quality: tight gap, the wrong position of the joints, the surface clean, straight seam In the bonding, to bond firmly, the surface clean, no overflow glue, the floor block arrangement reasonable and beautiful. Skirting line quality: Seam tight, smooth surface, height, wall thickness consistent, seams arranged reasonable appearance, It is easy to cut the wax, wax soft wax, wax cloth should not even reveal the end, smooth and bright, consistent color, uniform thickness , Clear grain, clean surface.
