Home > categories > Machinery & Equipment > Gantry Cranes > i need help with the opperation controlls of an 1960's ford 18 wheeler?
Question:

i need help with the opperation controlls of an 1960's ford 18 wheeler?

i need to know what the two rods on the floor are.one appears to be a mechanical parking brake, and the other might be the switch to shift from low/hi ratios in the rear axlethe other controll is a lever on the steering colum that is labeled quot;not for parkingif it helps, this isa 1960's f800 equip[ed as a logging truck.i know the rest of tyhe controlls, just minus those, and i realy dont wan to start it without knowing what they are

Answer:

once you're ingesting 3 food an afternoon you additionally should have some gentle snackswhich might recommend ingesting 4-5 cases an afternooningesting 5-6 cases mini food an afternoon is in basic terms breaking that up slightly extra so which you at the instant are not ingesting as lots at one timein case you have extreme blood sugar issues this would help yet different sensible they're the comparableyet maximum folk do no longer even eat 3 food or over eat in the time of those 3 food so in the event that they further snacks they could earnings weight.
Indian Dosa, Chapathi.
Pears, peaches, blueberries, apples minus skin, most pastry, potato products, etc.
The not for parking thing is a trailer brake controlIt applies the trailer brakes without applying the tractor brakesThe farther you pull it down, the harder it applies the brakes on the trailerAs for the rods on the floor, without seeing them I couldn't tell youIt is possible that it is for a PTO pumpIf the truck is equipped with a crane or winch lines, the levers in the floor probably operate thatIt could also be a manual emergency parking brake if the truck is not equipped with air brakesIf the truck has two gear shift levers or has a knob on the gear shift that you can pull up and down, I would say it is not likely that the rod in the floor is for a multi-speed rear endBy chance, is the truck an all wheel drive? If so, that may be what the levers are forTo find out, look at the front axle and see if it has a differential like the rear ends do.

Share to: