I want to make materia from final fantasy XIV. Can anyone give me pointers on how to cast a solid, spherical jewel and not a half-dome type? any pointers on making a high quality sculpture to cast the mold over would also be greatly appreciated.
You can get small locks that are drilled through the cabinet around the center area, or one that will lock above to the top, on each door. They have a small turning metal tab.that will grab the opposite door or into the top frame of the cabinet. They will not keep out a burglar, but will keep out your usual nosy roommate. Order them from Van Dykes Restorers Catalog, or Google cabinet locks. Just be careful where you hide the second key!
No the roller isn't dry, just try cleaning it with a mild soap and water solution to get the paper build up off the rubber. Make sure the printer is completely unplugged from the wall voltage when doing this and be sure to dry the roller completely and don't spill any water into the printer, apply the soap and water solution to your cleaning rag only. I clean rollers on copiers and printers this way everyday and it usually takes care of paper feed problems, unless the roller is completely worn out, then it must be replaced.
