Is outside building protection single row bent with cantilever steel instead of channel steel?
Construction of single door rack erection of cantilever I-beam steel can not be used instead of steel, because the provisions of article 6.10.2 JGJ130-2011 "construction of steel tubular scaffold safety technical specifications" cantilever beam application of biaxial symmetry,...... steel beams shall not be less than 160mm. Therefore, the channel shall not be used, the cross section is asymmetrical, and the cantilever bent, the cross section is more likely to be unstable.
JGJ130-2011 "construction of fastener type steel pipe scaffolding safety technical specifications" article 6.10.2 provides that cantilever steel beam applied biaxial symmetric steel, steel beam cross section shall not be less than 160mm.Therefore, the channel shall not be used (cross section asymmetry, cantilever bending, cross section is more likely to lose stability)
Cantilever supporting part of the No. 16 steel support, high-strength steel wire rope cable stayed with the upper flange, cantilevered spacing is 3 meters, placed No. 10 channel in the pole position, welded 100mm Phi 20 steel rod, fixed pole for preventing pole displacement.
