Home > categories > Rubber & Plastics > Rubber Hoses & Fittings > Is the rubber pipe joint installed in the middle of the pipe and pump for shock absorption?
Question:

Is the rubber pipe joint installed in the middle of the pipe and pump for shock absorption?

Is the rubber pipe joint installed in the middle of the pipe and pump for shock absorption?

Answer:

According to the pumping station environment, the noise source is not close to the pump house for sound insulation treatment, the noise of the pumping room will be taken sound absorption / sound insulation treatment, doors and windows should do sound insulation treatment, and so on.
Control the noise produced by parts of machinery, equipment, and equipment. The pump foundation of the new pump house should adopt heavy weight to prevent vibration from producing noise. Vibration isolation should be set up with rubber vibration isolating pads to reduce vibration noise. Each pump unit shall be provided with a foundation to prevent resonance. Use "soft" connection as far as possible in the suction pipe and pressure pipe of the pump. Periodic maintenance problems, such as packing leakage, equipment parts loose, serious wear and tear of equipment parts, mechanical vibration and so on, should be repaired in time, thereby reducing noise.
A pump is a machine that transports liquids or pumps liquids. It will be the prime mover of the mechanical energy or other external energy transfer to the liquid, the liquid energy increase, mainly used to transport liquids including water, oil, alkali liquid, emulsion, suspension emulsion and liquid metal, but also transport liquid, gas mixtures and liquids containing suspended solids. Pump performance of technical parameters are flow, suction, lift, shaft power, water power, efficiency, etc.; according to the different principles of work can be divided into volume pumps, vane pumps and other types. Displacement pump is to use its studio volume changes to transfer energy; vane pump is to use the rotating blade and water interaction to transfer energy, there are centrifugal pumps, axial flow pumps and mixed flow pumps and other types.

Share to: