After walking the program, suddenly without control, the console with the lights are new, console is 240, shake head lamp and PA lamp is even together, seek heroes answer!! Urgent urgentSometimes reset just fine, now turn off the console, shaking his head lights still walking program, sometimes back under the X or Y is not controlled now head lamp is not bright, PA light a master can master what I do
A lot of reasons can cause this problem. You can check the signal line, the code between the light and the light, whether the static electricity is good or not.
In addition to electrical appliances, is there a mechanical transmission? If yes, please check whether the drive parts are good. For reference only.
There are 2 problems; 1. console, console 240 is not stable, I used a few are the same problem, the console shell screw unloading see there are a lot of chips, such as IC, may be the IC chip, the loose contact is not good, each press just fine the. The 2. signal line interference, LED par sometimes with long fever will appear interference, some lighting factory in order to save the cost of circuit board materials, fan and a poor XLR line interference signal will appear, this material is out of the question. There is also a suggestion that it is better to separate the signal line of the shake head lamp and the signal line of the LED PA lamp.
