What are the differences between the eight cups and the eight bubbles?
You can paste the insulation board on the wall, you can polyurethane foam, you can paste the benzene board, you can also electric film (wall dedicated)
New home ready to do the sun room ceiling is the choice of stainless steel or aluminum alloy material is good, what are the pros and cons? Analyzed as follows: from the price point of view: stainless steel materials than aluminum alloy expensive; from the aesthetic point of view: aluminum alloy material is slightly heavier than the stainless steel; from the material properties, there will be a slight deformation. In general, the aluminum alloy has a thickness of not less than 1.5 or 2 thick. It is made of 110? 44 or 100? 44 aluminum, and the thickness should not be less than 1.5 or 2 thick. Stainless steel material to do the support of conventional selection: specifications 2.5? 5 or 5? 7 appropriate, it is recommended to use the latter, since it is sunny canopy, then have to consider the wind load or snow load. The former about 140 yuan / root, the latter 250 yuan / root (each length of 6m). Common models of stainless steel is divided into: ... the choice of 304 on the grade of the. In addition, the stent is resolved, is the choice of the ceiling material, the ceiling common materials are sun panels and glass, safety glass market price of more than 200 yuan / ?, use glass to do roof reference practice: assuming that each glass is 1 ?, suitable for the selection of 0.6 + 3 pieces of film (that is, two pieces of glass three film combinations, practices and hollow glass similar), and 1.5 ?, appropriate selection of specifications 0.8 +3 film. The purpose of the film is to prevent the glass from falling after falling. The above statement can be used for your reference, the specific choice and configuration? Radish cabbage, have their own love ~ ~ believe that friends will have the above description after reading the answer.
