What is the thickness of the thin fire retardant paint brushing each time?
Thin-type fire retardant coatings on the market for water-based paint, do not rule out the possibility of oil paint. Generally there are two kinds of spraying or brushing. Spraying thickness is generally between 05-1mm. According to the different characteristics of the coating to determine the construction process.
Thin-type fire-resistant paint brushing or spraying the thickness of each 0.5-2mm, according to the nature of the material to determine the thickness. Thin fire retardant coating if it is the kind of wear and tear that the amount of more than the burden of consumption in Russia with the same thickness of the spray between the 1-1.5mm appropriate. Wait until the coating is dry and spray the next time, the thickness of the coating is not sag as the standard. First, the construction method 1, before the construction of steel surface to be rust treatment, and remove the surface dust, oil, spray 1 to 2 times the anti-rust paint. 2, with a bucket spray device with 0.4-0.6Mpa air pressure spray, paint to be evenly stirred. 3, pay attention to the first coating coating thickness of 1mm or so, dry and spray the second time, the coating thickness of 2mm, after drying spray the next time, and so on until the corresponding coating thickness. 4, according to the requirements of the fire limit level, spray to the appropriate coating thickness. 5, when the surface requirements of smooth and smooth, should be applied to the last side of the spray for smoothing. Third, the note 1, the coating can not be mixed with oily paint in the wet state. 2, the construction temperature should be above 0 ℃, rain or surface condensation or air humidity more than 85% when the construction should not be. 4, the paint is not combustible, not fried, non-dangerous goods, all kinds of transport can be transported.
