What is the trouble with the vacuum pump used in the oil filter? How can it be removed so that the oil filter works properly?
3. long time shutdown, before starting the vacuum pump, should be interrupted repeatedly start the vacuum pump;4. after using the vacuum pump, vacuum pump should be put on;5. in the vacuum pump operation, the oil temperature should not be higher than 75 degrees, such as the cause of the fault, please contact the vacuum pump manufacturers immediately;6. if the vacuum pump is inhaled impurities, dust, moisture, chemicals and other potential dangers, should be equipped with precision filter in vacuum pump inlet position, if the impurities, dust, water is too large, must be filtered with piggy bank, in order to prevent dust and water chemical substances and other impurities in the vacuum pump;7. if the vacuum pump takes 24 hours to operate, the vacuum pump must be maintained and repaired every six months;8. vacuum pump in the normal operation, should keep the pump vacuum oil is not less than oil marking, should be in the oil mirror 2/3, refueling, strictly prohibited with different grades, models of vacuum pump oil mixed use9., regular replacement of vacuum pump oil, usually 3~6 months for a replacement, such as the discovery of pump oil, emulsification, carbonization and other circumstances, should also be timely replacement of vacuum pump special oil
If the problem of vacuum pump is not very serious, we can disassemble the vacuum pump and replace the vacuum pump. After cleaning the vacuum pump, the vacuum pump can be cleaned and assembled to achieve the purpose of maintaining the vacuum pumpThe correct maintenance of vacuum pumps can reduce the difficulty of vacuum pump maintenance. Proper maintenance of vacuum pumps can be used to make better use of vacuum pumps. The following suggestions are made on the maintenance of vacuum pumps:1. rotary vane vacuum pump should be installed in a clean and clean environment, should not have debris, dust, water, high temperature areas;2., the first installation of vacuum pumps should check whether the motor is turning, that is, the motor and the pump rotor to the same direction, the general motor above marked with the normal direction of the motor;
The vacuum pumps used in oil filters usually do this:1. the exhaust of the vacuum pump is smoke;2. vacuum pumps, oil spills, oil spills;3. vacuum pump noise exceeds standard;4. vacuum decrease;5. vacuum pump, hot and so on;
