The instructions on the blender say that some food should be moved with a little bit. What does "dot move" mean?
This situation is generally continuous operation, point movement and stop three buttons.Point moving, that is, point, move, do not move, will not produce self lock, that is, point movement priority".
The point of the mixer is moving, that is, the point is moving, no point does not move, it will not produce self-locking, that is, point movement first". Jog, move and stop three buttons. General mixer point movement in the file number of the left, press, stir, loosen, stop, usually used to break big and hard things. Point motion is one of the motor control modes. Because there is no self-protection in this control loop, there is no other automatic device, but just press the start button of the control loop, the main circuit is energized, the start button is switched off, and the main circuit is out of power. The most typical is: traffic control. Contactor itself is not mechanical self-locking, the self-locking is on the circuit, you must first understand this. The general point is through the button to give power to the coil of the contactor, and the contactor, release the button after the contactor coil power, this is the point to move apart.
Just point the power on, that is, turn around, do not point, do not turn
Electric is the switch, press it and press it. When the power is pressed, the power can be connected, and when you let go, you disconnect
General mixer point movement in the file number of the left, press, stir, release, stopGenerally used to break big and hard things first
