Why is a wireless router sent by telecommunication disconnected from the network?
Access point B, as a wireless signal source, is set to the basic AP form. Therefore, the location can be either a wireless router or a wireless repeater. Let's take the TL-WR340G+ wireless router as an example.First, use the router's default management address, 192.168.1.1, to access the router management interface. Then click the basic settings in the wireless parameter to see the router's wireless configuration at this time. Write down the SSID number of the wireless network, "TP-LINK_74971E""At the same time, the MAC address of the wireless state is recorded in the running state of the management interface. 00-21-27-74-97-1E"At this point, the wireless router does not need to do any other settings.
In the secondary router, enter the MAC address of the main router, and set a blocked segment to turn off the dhcp.
In view of the wireless router, the wireless relay is used to check the network interruption and the operation steps:I. confirm routers support wireless relay;Two. Buy a router of the same type or a router that supports wds;Three. Enter the MAC address of the secondary router in the main router;
